*************************************************************************
**        FANUC Open CNC FOCAS1/HSSB Libraries for WindowsCE 3.0       **
**                                                                     **
**                            Edition 03.0                             **
**                                                                     **
**      Copyright(c) 1999-2001  FANUC Ltd.  All rights reserved.       **
*************************************************************************

This document provides the following information about "FOCAS1/HSSB
Libraries for WindowsCE". Please read this document before using.

------------------------------------------------------------------------
[01] General
[02] Environment
[03] Contents of the Diskette
[04] Set up
------------------------------------------------------------------------

========================================================================
[01] General
========================================================================
  FOCAS1/HSSB Libraries includes the C-language functions for data
exchanging between PC and CNC/PMC. As for the specifications of functions,
please refer to "focas1is.txt".

Attention : Supported all functions are described in "focas1is.txt". 
            The header file ("focas1is.h") includes some functions which
            will be supported in the future.

========================================================================
[02] Environment
========================================================================

  This libraries are only for FS160is/180is/210is-Model B.

========================================================================
[03] Contents of the Diskette
========================================================================
  The following files are in this diskette.

  readme.txt    : this file
  readmej.txt   : this file (Japanese version)

  document.exe  : compressed document files (Self-Extracting)
      Please execute it to extract the following documents.
        focas1is.txt   : specifications of functions of FOCAS1/HSSB Libraries
        focas1isj.txt  : specifications of functions of FOCAS1/HSSB Libraries 
                         (Japanese version)

  focas1is.exe  : compressed library files (Self-Extracting)
      Please execute it to extract the following files.
        focas1is.lib   : data window import lebrary
        focas1is.h     : header file for CNC/PMC data window functions
                         (for eMbedded Visual C++)
        focas1is.bas   : header file for CNC/PMC data window functions
                         (for eMbedded Visual Basic)
        setupis.exe    : installer
        FOCAS1is\System\focas1is.dll
        FOCAS1is\System\f1is16.dll
        FOCAS1is\System\f1is16w.dll
                       : data window dynamic link library

========================================================================
[04] Setup
========================================================================
FOCAS1/HSSB libraries are pre-installed into FS160is/180is/210is-B.
When you reinstall FOCAS1/HSSB Libraries with some reason, please
follow this procedure.

   - Set up procedure -

    (1) Copy all extracted files (including folder) in the FOCAS1/HSSB
        Libraries floppy disk (A02B-0207-K735) to ATA card.
    (2) Power-on FS160is/180is/210is.
    (3) Insert above ATA card into the PCMCIA slot of FS160is/FS180is
        /FS210is.
    (4) Open "My computer" on desktop and confirm that ATA card is
        recognized as "Storage card2" automatically.
    (5) Open "Storage Card2" and start "Setupis.exe".
    (6) Check the "Focas1is" check box and tap "OK" button or press 
        "INPUT" key.

    Note) "Setupis.exe" is run automatically if the ATA card has been
          inserted before the power is turned on.
          After completion of the setup, remove the ATA card then cycle
          the power.


=========================================================================

**  Microsoft, Windows, Windows NT, Windows95 are trademarks or registered
    trademarks of Microsoft Corporation.

**  Other product names mentioned are trademarks or registered trademarks
    of their respective companies.

**  This software which you have can be copied only in your development
    site if necessary. However, the copyright of this software is owned by
    FANUC LTD. and you may not redistribute all or part of this software
    to others for the purpose of application development.
